Antique Drafting Table
Antique drafting table – used to create drawings of drawings and to review large documenter. Drawing boards are valuable tools for engineers and artists, but can often consume valuable space. A folding drawing board provides the user with the space they need when working with drawings, but can then be stored out of the way while not in burg. Student who needs preparation tables for school work can take advantage of a folding antique drafting table, as it will not take up valuable floor space.
Build an antique drafting table, use a circular saw to cut two pieces one by four to 42 inches and till 29 inches. Placer the shorter pieces so they are flush against the side of the longer pieces and use wood screws to fasten them together. This is the framework for preparing tabletop. Top will measure 42 inches by 31 inches. Cut the top of the drawing table of 1/2-inch plywood. Den must measure 42 inches by 31 inches. Position the cut plywood on top of the drawing table frame and secure it in place with wood screws through the top of the plywood and into the one-for-four frame. Use sandpaper to smooth down any sharp edges or dusting with a cloth. Spread adhesive laminate to the edge of the top of the 1/2-inch plywood and placing a piece of the table top laminate space.
18 Photos Gallery of: Antique Drafting Table
Ideas for build an antique drafting table, measuring four feet from the floor and use a stud finder to locate the studs in the wall and mark them with a bland. Secure the hinges to the assembled second and fourth, so that they are located four inches in from both sides of the drawing board. Use 1/4-inch PVC pipe to create the collapsible leg. Glow hind legs to 48 inches long and forelegs to 40 inches. Use a drill to drill a hole through the PVC hinges and fasten the two studs on each side of desktop. These hinges will support the back legs of the desk while it is in use.
Build an antique drafting table, slide two PVC T-joints down the front and back leg pieces and connect the back and front legs, along with two pieces of PVC pipe that is 31 inches long. Repeat this process for the other side of the rear legs desktop. Snap into the secured PVC hinges and fold the legs of the road under the mounted two by four. Attach the top of the desktop to the hinges on the two-by-four support mounted on wall. Have an assistant hold the desktop up high enough that the hinges can be placed on the back of the desk and fastened with screws. Fold PVC legs and rest on top of the desk on top of front legs. The desktop will have an eight-inch drop from the rear to the front is easier to use.
antique drafting desk, antique drafting table, antique drafting table craigslist, cast iron drafting table, dietzgen drafting, dietzgen drafting table, drafting table craigslist, drafting table with drawers, iron drafting table