Paint The Wrought Iron Patio Furniture

Home » Home Furniture » Paint the Wrought Iron Patio Furniture

Wrought iron patio furniture – scrub every inch of wrought iron furniture with a wire brush. Wire brush will remove rust and any loose paint. If you leave any rust on the furniture, it will show through the paint and create rough spots on the furniture. Sand furniture with medium grade sandpaper to remove any remaining paint from furniture. Remove paint from the intricate details or crowded areas, fold the paper in half and rub the sharp edge carefully in the cramped space. Use a commercial paint remover to remove any lingering or excessive color of sandpaper and wire brush does not remove the color completely; Follow manufacturer’s instructions for use.

Posted on November 4, 2017 Home Furniture

Spray furniture with water through a hose to remove loose rust and paint particles. Allow the furniture to dry completely. Wipe the wrought iron patio furniture thoroughly with a soft cloth dampened with vinegar. Vinegar helps remove any remaining grease and dirt from wrought iron surface. Allow the furniture to dry completely. Protect your patio area by establishing a layer of plastic. Stand in the furniture upside down on the plastic.

21 Photos Gallery of: Paint the Wrought Iron Patio Furniture

RELATED TOPIC :   Wrought Iron Patio Set: Attractive and Good Looking

Coat the underside of furniture with a metal outer spray primer. Keep the paint can be 6 to 8 inches from furniture and apply paint evenly in a left to right motion. In order to avoid drips and runs, can keep moving consistently and not color to an area of more than two seconds at a time. Allow the primer coat to dry completely according to the manufacturer’s instructions. Turn piece furniture upright and prime the top of the piece with the same external spray primer in the same way. Let the primer dry.

Turn furniture upside down and paint the underside with a thin layer of metal spray paint outdoors. Keeping the color, the 6 to 8 inches from the wrought iron patio furniture. Apply proper exercise spray in a left. Keep it move consistently apply a light coat of paint on the metal surface. Let the paint dry completely. Painting surface with a second layer of metal spray outdoor paint needed. Let the paint dry completely. Turn piece wrought iron upright and paint with metallic exterior paint in the same way. Allow the paint to dry before applying a second coat is needed. Let the paint dry.

RELATED TOPIC :   Tips Consider Outdoor 3 Piece Patio Set

Spray a light topcoat of exterior polyurethane on top of the wrought iron patio furniture. Keeping the exterior polyurethane spray 6 to 8 inches from the furniture and spray evenly from left to right. As with the spray, hold the can move smoothly to avoid drips. Let the polyurethane dry matter fully, then a second light layers. Turn the furniture to seal the bottom with two coats of exterior polyurethane spray polyurethane after drying on top. Allow the finish to dry between coats.

Tags: wrought iron vintage patio furniture, vintage wrought iron table, vintage wrought iron patio set, vintage wrought iron outdoor furniture, vintage wrought iron garden furniture, vintage wrought iron furniture, vintage wrought iron chair, vintage iron patio furniture, vintage cast iron patio furniture, painting wrought iron table, painting wrought iron patio furniture, painting wrought iron furniture, painting iron furniture, how to paint wrought iron patio furniture, briarwood wrought iron patio furniture, black wrought iron patio chairs, black rod iron patio furniture